In knowledge base at mitsubishi-automation.com I found: " How can I set the real-time clock of my FX PLC? (General (FX)) - KS00781 To set the real time clock for FX1S, FX1N, or FX2N© PLC you can use the "TWR" (set clock) function. Use this instruction to save the time and date ... read more To set the real time clock for FX1S, FX1N, or FX2N© PLC you can use the "TWR" (set clock) function.
Use this instruction to save the time and date information you have entered in the real-time clock. The TWR instruction uses 7 sequential data registers for the information: Year, month, day, hours, minutes, seconds, and day of the week, If you have an older FX PLC then you can set the real-time clock as follows: 1 - Stop the real-time clock by switching on the relay M8015. 2 - Replace real-time information with new information that will be set. Time unit Seconds register D8013 minutes D8014 hours D8015 days D8016 months D8017 years D8018 COMMENT: Day of the week (D8019) is set automatically via the set date of the PLC. 3 - Restart the real-time clock by switching off relay M8015. At the end there is info day of week is set automatically. You guys wrote that it must be set manually or PLC needs a code to set up automatically. So what is the true? Inntele - could you attach code to set day of week in PLC automatica
.png "English"){kind=small}
1 komentar:
Terimakasih informasinya mas
Posting Komentar